Best answer
How to Install Curtain HoldbacksLook at the window treatment that covers your windows. …Make a pencil mark on one side of the window where you want to set the curtain holder. …Measure the location of the curtain holdback from the bottom of the floor on the side you marked and repeat on its opposite side and make a mark.More items…
People also ask
How do you install a curtain holdback?
How to Install Curtain Holdbacks 1 Look at the window treatment that covers your windows. … 2 Make a pencil mark on one side of the window where you want to set the curtain holder. … 3 Measure the location of the curtain holdback from the bottom of the floor on the side you marked and repeat on its opposite side and make a mark. More items…
How do you measure for a tieback curtain?
For example, if the window is 60 inches tall, divide 60 by three to get 20, and measure 20 inches up from the bottom of the window for the tieback. When the curtain is considerably longer than the window, set the tieback one-third of the way up the curtain rather than the window.
How are curtain tie backs attached to the wall?
Tie backs normally have 楧?shaped rings sewn to either end. These 楧?rings are then hooked onto a tie-back hook which is screwed into the wall next to the outer edge of the curtain, at a height that looks pleasing to the eye, to secure them in place.
How high should curtains be mounted on the wall?
Measure 39 inches up from the floor if the curtains are 84 inches long or floor-length. Have a friend hold the curtain panel back at this level, and stand on the other side of the room to see if you like it. If not, have your friend adjust the level higher or lower until you are satisfied. Mark the spot on the wall lightly in pencil.