how wide to make curtain panels

Best answer

Generally,designer quality drapery treatments are at least1.5 widths per panel (72?finished width) or 2 widths (98?finished width). But for smaller windows and especially ones that butt against a wall,a single width is fine.

People also ask

  • What size curtains do I need for my Window?

  • Example: If your window measures 36 wide (window width x 2 = 72), you need curtains that will give a minimum width of 72 or 2 panels for that window. In this case 2 panels will give about 100 to 120 of width which will look nice and full. Always round up to the next full number. Common Fullness multipliers (multiply your measured width by):

  • How do you measure the width of a curtain panel?

  • The width of the curtain panel, as listed on the packaging, is the flat width of the panel — unless the package indicates otherwise. If the package lists the flat panel measurement as 54 inches, and the area to cover is 100 inches at double fullness, divide 200 by 54 for the result of four panels.

  • How do I add a 20 inch panel to a curtain?

  • Related Articles. If you need an additional 20 inches of width for each curtain panel, for example, you can add two panels, each 10 inches wide, to the sides of the pre-made panel. You could cut the pre-made panel down the center and add a single 20-inch wide fabric panel there; or you could cut the pre-made panel into quarters…

  • How do you make curtains for a small room?

  • To make curtains, measure the height and width of your window so you know how much fabric you檒l need. Then, buy fabric with a little extra width so you’ll have folds in your curtains when they hang. Next, cut your curtains to size and pin 1 inch seams on the back of each side.

    how wide to make curtain panels

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Scroll to top