If you檙e using a traditional curtainrod, mark the location of the brackets on the wall and drill pilot holes. Install the brackets and screw them into place. Attach the curtainrodand adjust it as needed.
People also ask
How do you hang curtains with rods?
Screw the brackets to the casing or the wall, then fit the rod onto the brackets and use your level again to make sure the rod is straight. Then, hang your curtains and enjoy! For tips on what kind of rods to use with different types of curtains, keep reading!
How do you level a curtain rod with a bracket?
Set the curtain rod in the bracket, tighten the other bracket loosely onto the other end of the rod using the setscrew in the bracket, and lift the rod and level it with a level while you move the bracket the required longitudinal distance from the frame using a tape measure to measure this distance.
How to hang curtains with brackets?
Screw the brackets to the casing or the wall, then fit the rod onto the brackets and use your level again to make sure the rod is straight. Then, hang your curtains and enjoy!
How do you increase the length of an expanded curtain rod?
Consider the length of the rod when hanging the brackets. Though most curtain rods are adjustable, you don’t want the distance between the brackets to be so wide that the rod sags in the middle. In general, you shouldn’t increase the length of the expanded rod by more than 50 percent. Drill pilot holes to help start the screws.