Attaching Blackout Linings Step 1 Start bylaying the curtain face down on a flat surface. Place the lining on top of the curtain,right side up. Step 2 When using standard curtain hooks,insert the hook into lining tape and then curtain tape,select the right hook position for curtain pole or track.
People also ask
How to use blackout fabric to cover a curtain?
Then, lay the blackout fabric on top of the printed curtain fabric and center it. The blackout fabric should look the same on both sides, but 1 side may look glossier than the other and this side should be visible. Ensure that the edges of the blackout fabric are the same distance from the edges of the printed curtain fabric.
How to cut blackout lining fabric?
The blackout fabric does not need to be as large as the printed curtain fabric because it is only lining the curtains. Use the window dimensions that you found to cut the lining fabric. For example, if the dimensions of the window were 42 inches (110 cm) by 60 inches (150 cm), then cut your blackout lining fabric to these dimensions.
How long to iron blackout curtain lining?
When holding the iron over the blackout curtain lining, the typical duration is twenty seconds and a maximum of sixty seconds for heavier and thicker fabric types. However, you may need to work in ten-second intervals to avoid burning the fabric.
How big does blackout fabric need to be?
The blackout fabric does not need to be as large as the printed curtain fabric because it is only lining the curtains. Use the window dimensions that you found to cut the lining fabric.