how to make pocket curtains

Best answer

Pocket curtains have a pocket where you slip the rod through. To make them you need tohem the top of the material,then sew or use ironing tape to fold the top down about 4 inches to the back. Then leaving about 2 1/2 inches for the pocket sew another seam or use ironing tape to seam off the top about 1 1/2 inches tall.

People also ask

  • How do you make a rod pocket for a curtain?

  • Create rod pocket Fold the top fabric over 3 1/4 inches, pin, and sew along the fabric’s edge so that a pocket forms between the top of the curtain and the stitch. Cut any loose threads.

  • How to put up curtains?

  • Rod pockets are a classic method of putting up curtains; they are also the most common. With rod pockets, you sew in a pocket at the top of your curtain that can easily fit your rod and conceal it. People love rod pockets for their simple and casual look; they require nothing else but rods and curtains.

  • How do you cut a curtain for a pocket door?

  • Hall recommends adding 7 1/4 inches to both the height and width measurements to account for the top pocket and side and bottom hems. Cut a rectangle of your curtain fabric to these measurements, and then cut the lining fabric three inches shorter than the fabric (but the same width).

  • How do you Hem a 8 inch curtain rod?

  • Fold over 6 inches of fabric at the top of your panel (if you will be using a thick curtain rod, then make this 8 inches). Pin the hem in place and press it with your iron. Using the lines on your sewing machine as a guide, sew a straight seam 1 inch below the folded edge.

    how to make pocket curtains

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Scroll to top