how to make a blind from a curtain

Best answer


Stitch down both sides and along the bottom edges,2cm in from the edges. Make a second row of stitches across the bottom,5mm in from the edge. Insert a dowel into the gap between the 2 rows of stitches. Turn the blindthe right side. Lay the blind on a flat surface,lining side up,and pin the two layers together all over.

People also ask


  • How do you make a face curtain for a blind?

  • Place your face fabric on a flat surface facing up, and your lining on top of it facing down, pin the two together down the sides keeping the sides level with each other. Sew down both sides of the blind exactly 1cm in from the edge (mark with a light pencil line if needed.)

  • How do you make curtains with lining and fabric?

  • Always press both the fabric and lining. Measure the width and height of the inside of your window where the shade will be hanging. Cut out your fabric adding 1/2 to each side and 4 to the length.

  • How to attach fabric to roller blinds?

  • Attach the Material: Once the fabric has been cut it is time to attach it to the roller. Put double-sided tape on Roller blind tube running layers from side to side. the tube should be approximately covered 70mm across. Now place the fabric on the flat surface and then gently put the roller tube on the material.

  • How do you make a curtain shade for a window?

  • Measure the width and height of the inside of your window where the shade will be hanging. Cut out your fabric adding 1/2 to each side and 4 to the length. Take your lining and mark out your measurements for the tube tape (show below) with pins. The first row of tape should be 5 inches (12.7 cm) from the bottom.

    how to make a blind from a curtain

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Scroll to top