how to hem a curtain with a sewing machine

Best answer

If you are using a sewing machine to hem your curtains, start by finishing the raw edge with a serger or zig zag stitch. Thenpress a 1?hem and iron to hold in place. Use a sewing machine or coverstitch machine to sew the hem.

People also ask

  • How do you put a hem on a curtain?

  • Then, fold the bottom of the curtain up the width you want the hem to be, and press it flat with an iron. Next, fold the hem up again by the same amount, and press it again. Finally, use iron-on hem tape to fuse the hem to your curtain. Alternatively, if you have a sewing machine, you can sew the hem.

  • How do you sew a curtain with a sewing machine?

  • The sewing machine I’m using is pretty straightforward; put the starting point of the fabric under the shoe and flip the lever downward to hold the curtain in place. The fabric can still move, so always be aware of where the edge of the curtain is and where the sewing needle is headed.

  • How do you Tuck the lining of a curtain in?

  • Curtain linings are usually tucked into the side hem. If you are hemming a store-bought curtain, this could be a problem, depending on how short you are cutting and hemming your curtain. Use a seam ripper to undo the bottom portion of each side hem, and trim the lining down to the length you need. You will tuck it back into the side hems later.

  • How much fabric do you need to hem curtains?

  • Make sure you have enough fabric for a double-folded hem. Curtain hems are folded twice at the bottom, so you will need twice as much fabric for the hem. This means that you will need to cut your curtains longer than you want them to be.

    how to hem a curtain with a sewing machine

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Scroll to top