To hang curtains on a traverse rod,youattach drapery hooks to the curtains,and then slip the hooks through holes in the carriers. When you pull the cord,the carriers move along the track. The key to making your own traverse rod curtains is choosing a style that looks and functions right with the carrier system.
People also ask
How do you use a traverse rod on curtains?
If you want to use a traverse rod, that opens and closes with the pull of a cord, you need to alter your tab-back panels to accept a drapery pin. Just by making a small single-finger pleat, the curtains can accept a pin and hold the folds in place as the curtains are opened and closed on a traverse rod.
What is the best way to hang a curtain on a wall?
Standard traverse rods, as you might have guessed, are the most prevalent options. They don do anything special, but they are capable of concealing the hardware used to hang the curtain.
Where do the pins go on a traverse rod?
The two pins you didn connect to any of the openings must be linked to the rod itself. You檒l find the spots for those two remaining pins at the front and the side of the traverse rod. Since these pins attach to the rod and not the clips, the front of the curtains can look uneven.
Can I add pins to my curtains to make them fit?
Your selection is limited somewhat by the fact that you need pins to be present on the curtains. However, there is a workaround for that problem. You can add pins to the curtains you like and apply other adjustments to make them compatible with the traverse rod.