how to fix roller blind curtain

Best answer


Start with the shade completely up. Take the roll up blinds down to gain access to the ratchet mechanism. Using a toothpick and some compressed air,remove any debris or dust around the ratchet. Thenlubricate the ratchet with some WD-40. Your blinds should now work.

People also ask


  • How to clean roller blinds?

  • Ratchet tooth is the part of the roller blind that holds the roller blinds in the position that you want. With a gentle but firm hand, remove the roller blinds from the bracket. Remove the flat pin cap placed in the side of the roller blinds. You will find the pawl there. Clean it thoroughly.

  • How do you fix roller shades that Won’t Roll Up?

  • Roller Shades: 3 Common Problems and How to Fix Them 1 Too Slow – Start with a lowered shade. Remove the shades from the bracket. Then roll it up by hand to the half way point. 2 Too Fast – Start with the shade up. Remove it from the brackets. Then unroll it by hand to the half way point. When you… More …

  • How to remove blinds without damaging them?

  • Remove the shades from the bracket. Then roll it up by hand to the half way point. When you replace them, it should work just fine. Too Fast – Start with the shade up. Remove it from the brackets. Then unroll it by hand to the half way point. When you replace the blinds, they should work normally.

  • How do you roll up an electric window blind?

  • Lift the flat pin-end from the bracket and roll up the blind by hand. Return the rolled blind to the bracket. Pull down the blind to check for resistance. Repeat the pull down and hand rolling steps until the blind works correctly.

    how to fix roller blind curtain

    Leave a Reply

    Your email address will not be published.

    Scroll to top