how to fix curtain rail

Best answer

Your best solution would be totake the curtain rail down completely and re fix it. Fill in the existing holes and repaint the wall if necessary then put it back up as if it were new. You’ll need to avoid the existing holes and some of the answers to this question may be of use.

People also ask

  • How to fit metal curtain track in wall?

  • Normally pipes and cables run vertically down the wall to their outlet point. Drill the holes where you have marked the wall using a masonry drill bit. Push the rawl plugs into the holes until they are flush with the wall and then screw the brackets into position. How To Fit Metal Curtain Track in Easy Steps Back to top

  • How do you remove cording from a curtain rail?

  • Put a double knot in the end of the cording. Pull the slack out of the cording by pulling on it from the left side of the curtain rail. Run the free end of the cording between the two pulleys on the left side of the curtain rail. Use the hook or clip to pull the cording out the other side.

  • How do you fix a broken curtain rod pulley?

  • How to Fix a Curtain’s Pulley System. First, measure the entire length of the curtain rod across the top of the window, then the distance from the rod to the floor. Double the length from the top of the assembly to the floor and add in the distance along the top of the rod. Add at least 6 inches to that number to give you room to work.

  • What is the difference between curtain rail and Curtain Pole?

  • A curtain rail or track only allows you to clip your curtain to the track itself but with a pole you can do so much more.

    how to fix curtain rail

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Scroll to top