how to drill for curtain rods

Best answer


Position a stepladder near one side of the window. Place a curtainrodbracket at the desired location at one end of the window frame. Use the machined holes in the bracket as guides and mark the locations were holes will be drilledwith a felt-tip marker.

People also ask


  • How to hang a curtain rod without drilling into the wall?

  • In an effort not to drill into the wall to hang a curtain rod, my next best option was to use Command Hooks. But not every Command Hook is created equal. Some are too small to hold a rod, and others can hold the weight of fabric panels.

  • How do you drill holes for curtain rod brackets?

  • Use the machined holes in the bracket as guides and mark the locations were holes will be drilled with a felt-tip marker. Repeat this step to mark the locations for holes where a bracket attaches at the opposite end of the curtain rod.

  • Can you drill into a window frame to hang curtains?

  • How to Drill Into Metal Window Frames to Hang Curtains. However, with the right kind of drill bit and some patience, you can drill the holes and attach the brackets to the frame. To do this, you need a power drill and a cobalt drill bit that’s slightly smaller in diameter than the screws for the brackets.

  • How do you level a curtain rod with a bracket?

  • Set the curtain rod in the bracket, tighten the other bracket loosely onto the other end of the rod using the setscrew in the bracket, and lift the rod and level it with a level while you move the bracket the required longitudinal distance from the frame using a tape measure to measure this distance.

    how to drill for curtain rods

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Scroll to top