how to drill for curtain rods

Best answer

If you檙e using a traditional curtain rod,mark the location of the brackets on the wall and drill pilot holes. Install the brackets and screw them into place. Attach the curtain rod and adjust it as needed.

People also ask

  • How to hang a curtain rod without drilling into the wall?

  • In an effort not to drill into the wall to hang a curtain rod, my next best option was to use Command Hooks. But not every Command Hook is created equal. Some are too small to hold a rod, and others can hold the weight of fabric panels.

  • How do you drill holes for curtain rod brackets?

  • Use the machined holes in the bracket as guides and mark the locations were holes will be drilled with a felt-tip marker. Repeat this step to mark the locations for holes where a bracket attaches at the opposite end of the curtain rod.

  • How do you adjust the length of a curtain rod?

  • Though most curtain rods are adjustable, you don’t want the distance between the brackets to be so wide that the rod sags in the middle. In general, you shouldn’t increase the length of the expanded rod by more than 50 percent. Drill pilot holes to help start the screws. This can keep the screws from cracking the casing or wall material.

  • How do you get a curtain rod out of a window?

  • If you’d like to pull them completely away from the window, buy a longer rod or a rod that has a return (a 90-degree turn on each end that allows you to push the curtain around the turn or rest against the wall). The length of the return should depend on the type and width of the curtain.

    how to drill for curtain rods

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Scroll to top