Best answer
Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
People also ask
How to measure for curtains?
How to Measure for Curtains. 1 Determine Mounting Technique. When you begin curtain measurements, it important to decide whether you want to mount them outside or inside of the … 2 Determine Rod Length. 3 Choose Your Curtain Length. 4 Measure for Width. 5 Measure for Length.
How do I know what length curtain rod I Need?
Determine Rod Length. Before you measure your window for width, it best to choose the length of your curtain rod. Curtain rods are typically extended 3 to 6 inches past a window frame. However, because rods can be installed either inside, below, or above trim mount, determining where you install your rod affects the length.
How much clearance do you need for curtains?
?For floor length curtains you should allow 1 inch (2.5cm) clearance to avoid dragging. Now, with your track/pole fitted 6-8 inches (15-20cm) above the window recess, measure from the top edge of the track/pole to your chosen finished length. For Tab-top and all types of pleated curtains, write down your measurement.
What is the standard length of a window curtain?
This requires curtains to end roughly 15 cm below the windowsill. Floor length depends on what style you prefer, but standard curtain lengths usually end 1 cm above the floor. Curtain widths should typically be about 1 1/2 to 3 times the final width measurement of your window.