do i need a stud finder to hang curtains

Best answer


If you don’t have anchors,you can use a stud finder to see if you can find studs in the right location to help support your curtains. Place the rod onto your bracket and use a level to ensure it is straight. Hanging curtains is one of the first things you should do when you design your bedroom.

People also ask


  • How do you find the studs for a curtain wall?

  • Locate the Studs Locate the studs in the corners of the room, using the stud finder, recommends This Old House. In addition, locate the studs along the wall, above the existing window. Extra supports are required when a curtain rod spans more than 4 feet. Otherwise the rod may twist and bend, ruining the effect of your curtain wall. 3.

  • How do you hang tab top curtains with no studs?

  • Hang tab-top curtains high enough to ensue that no light leaks around the tabs. Wall studs are usually placed at 16 or 24 inches on-center. If no wall studs are available, install wall anchors in the drywall. Screw the curtain rod brackets into the wall anchors.

  • How do you use a curtain rod finder?

  • Standard Curtain Rod Placement. Locate the wall studs with a stud finder. Move the stud finder horizontally over the walls, above the corners of the window frame, until the light changes from green to red. Mark the spot, then continue until the light changes back to green. Mark that spot. Those marks indicate the edges of a wall stud.

  • How do you hang a curtain rod on a window frame?

  • In addition, curtain rod brackets usually secure to the wall studs around the window frame. Adjust placement of the rod to accommodate the wall studs’ locations. Measure 2 inches to the right and left of the top corners of the window frame trim. Mark with chalk or a pencil.

    do i need a stud finder to hang curtains

    Leave a Reply

    Your email address will not be published.

    Scroll to top